Car Repair & Maintenance : How to Fix Foggy Headlights

Comments

1. salemetro says:

   January 16, 2010 at 5:32 pm

   I usually use a D/A sander and start with 400 grit on the super-rough stuff….then work up to 800-1000 grit. Finish on a buffer. Works like a charm, but i realize not everyone has access to the tools required.
2. weasel884 says:

   January 16, 2010 at 6:20 pm

   you can tell comeone pre sanded those headlights by the marks.ive seen floor wax sand paper and polish do better.
3. kedigitalservices says:

   January 16, 2010 at 6:57 pm

   I have used wax (auto and household floor wax) in the passed. Initially it works but a few months later it turns yellow again. I have a 2000 voyager that fogged up really bad. It looked like they were painted light yellow. I used a micro fiber cloth attached to a sanding pad for my cordless drill and some turtle wax polishing compound & scratch remover like in the video. Took about 20 min per headlight, but they now look new again. Then used the same equipment to polish my van.
4. willsonnss says:

   January 16, 2010 at 7:14 pm

   bs wax on it