Meguiar’s W8006 6.5-Inch Soft Buff Foam Polishing Pad

4 Comments

1. 

   Larry F. Rogers

   5:37 pm on January 13, 2010

   This can be a very good product from a functional standpoint, but it requires a pad or buys expensive ainsi.Soyez aware that when you buy this carpet for your polishing machine, you must purchase the mounting plate as well, otherwise it is useless. Rating: 1 / 5
2. 

   S. Kumar

   7:10 pm on January 13, 2010

   I could not find this product in any store and I bought it on Amazon. Works very well as it should. No problem. Rating: 5 / 5
3. 

   Good Gora

   9:14 pm on January 13, 2010

   I was surprised by how much and how easily they even worked for an extended van. It saves wear on the shoulders. Rating: 5 / 5
4. 

   William W. Ofca

   11:23 pm on January 13, 2010

   I bought and used these foam pads with my orbital sander machine and they worked hard and has a fantastic job polishing my boat. The small problem is, how it fitted my stripes orbital sander, which) is a type of Velcro (Velcro. The support foam mat for this type of investment made, but it has a profile of small fibers. The fiber must be larger and more aggressive for better holding power in the machine. After a short period of use, the foam pad to fly the machine, if I let go of the trigger and away from the polished surface. I succeeded in the order in the operation of the machine and foam pad on the surface until it came to a halt before stopping the machine from there. I have never been this problem in the use of pads. Rating: 4 / 5